Model with pressure gauge on hose*
9
Connecting hose for connecting compres-
sor and sealant bottle or compressor and
wheel
Connector, cable and connecting hose are
stored on underside of compressor.
Using M Mobility System
To repair a flat tire with the M Mobility System,
proceed as follows:
>
>
>
Fill sealant into wheel, refer to page 227.
Distribute sealant, refer to page 228.
3
4
5
6
7
Connector and cable for lighter socket
Mounting for sealing bottle
Compressor
Produce tire inflation pressure, refer to
page 228.
On/Off switch
Filling sealant into wheel
Pressure gauge for indicating tire inflation
pressure
Strictly comply with the specified order,
otherwise highly pressurized sealant
could escape.<
8
9
Screw on pressure gauge for reducing tire
inflation pressure
1.
2.
Shake sealant bottle.
Connecting hose for connecting compres-
sor and sealant bottle or compressor and
wheel
Screw hose 9 onto connection of sealant
bottle.
3.
4.
5.
For model with pressure gauge on hose:
Make sure that screw 8 on pressure gauge
is closed.
Connector, cable and connecting hose are
stored in the compressor housing.
Model with pressure gauge integrated
in housing*
Screw dust cap off valve of defective wheel
and screw filling hose 2 of sealant bottle
onto valve.
Insert sealant bottle on compressor hous-
ing so that it is positioned upright.
3
4
5
6
7
Connector and cable for lighter socket
Mounting for sealing bottle
Compressor
6.
7.
8.
Make sure that the device is switched off,
position 0.
On/Off switch
Pressure gauge for indicating tire inflation
pressure
Insert connector 3 into lighter socket in
vehicle interior, refer to page 113.
8
Button for reducing tire inflation pressure
With the ignition switched on, refer to
page 60:
227
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
Product Specification
Categories | BMW 6-Series Manuals, BMW Manuals |
---|---|
Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
Model Year | 2009 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |