"Sport" program
In the event of a pressure loss, there is a change
in the rolling circumference and therefore the
rotation speed of the corresponding wheel. The
system detects this change and reports it as a
flat tire.
Select the "Sport" program if you want a con-
sistently sporty coordination of shock absorb-
ers and steering.
Selecting program
Functional requirement
Sequential Manual Transmission with Drive-
logic:
To ensure the reliable signaling of a flat tire, the
system must be initialized at the correct tire
inflation pressure.
The initialization must be repeated after
every correction of the tire inflation pres-
sure and after every tire or wheel change.<
System limits
The Flat Tire Monitor cannot indicate sudden
severe tire damage caused by outside factors
and does not detect a natural, even pressure
drop in all four tires.
Manual transmission:
In the following situations, the system could be
delayed or malfunction:
>
>
>
System has not been initialized
Driving on snowy or slippery road surface
Sporty driving style: slip in the drive wheels,
high lateral acceleration
>
Driving with snow chains*
Initializing system
Press the EDC button repeatedly:
The initialization finishes during driving,
>
>
>
"Comfort": LED off.
which can be interrupted at any time.
When driving resumes, the initialization is con-
tinued automatically. The system is initialized
after this activation phase. The system is not
initialized when traveling with snow chains*.<
"Normal": one LED lights up.
"Sport": both LEDs light up.
The last selected program is active each time
the engine is started.
With Sequential Manual Transmission via the
button in the center console:
You can also activate your preferred program
with the
button on the steering wheel, refer
to MDrive on page 55.
1.
2.
Start the engine, but do not start driving.
Press the button for approx. 5 seconds.
After the button is released, the warning
lamp lights up in yellow for several seconds
in the instrument cluster, refer to Message
with low tire inflation pressure The mes-
FTM Flat Tire Monitor*
The concept
The Flat Tire Monitor detects a pressure loss in
one tire by comparing the speeds of the individ-
ual wheels during driving.
87
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)