1.
Press the
button.
4.
Select the desired function.
This opens the start menu.
5.
6.
Press the controller.
2.
3.
Press the controller to open the menu.
Select "MDrive" and press the controller.
Turn the controller to select the desired set-
ting.
The functions contained in MDrive are dis-
played:
"Unchanged" retains the current setting
made outside of MDrive.
>
"SMG Drivelogic"
7.
Press the controller.
Sequential Manual Transmission with
Drivelogic: shifting modes and Drive-
logic driving programs, refer to page 64
The setting is stored for the remote control cur-
rently in use.
>
>
>
>
"EDC"
Programs of the Electronic Damping
Control, refer to page 86
Activating settings
Press the
button on the steering wheel.
The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions
"DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page 84
contained in MDrive are active.
"POWER"
Programs of the M Engine Dynamics
Control, refer to page 65
Pressing the button again deactivates MDrive.
If the indicator lamp flashes after the but-
ton was pressed, MDrive was unable to
respond because the ABS Antilock Brake Sys-
tem or DSC Dynamic Stability Control are cur-
rently regulating driving stability. Press the
button again when the indicator lamp no
longer flashes.<
"Head-Up Display"*
Views of the Head-Up Display, refer to
page 94
You can reset all settings for MDrive to their
default values:
>
"Reset to default"
Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
56
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)