Controls in detail
Useful features
approximately 2 to 12 in (5 to 30 cm) away
from the signal transmitter button (2, 3
or 4) to be programmed, while keeping
indicator lamp 1 in view.
X Step 4: Using both hands, simultaneously
press hand-held remote control button 6
and the desired signal transmitter button
transmitter button (2, 3 or 4) is pressed
and released.
the transmitting button, refer to the garage
door opener Operator’s Manual.
X Step 9: Press the “training” button on the
garage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the
following two steps.
X Step 10: Return to the vehicle and firmly
press, hold for 2 seconds and release the
programmed signal transmitter button
i If indicator lamp 1 flashes rapidly for
approximately 2 seconds and then turns to
a constant light, continue with
programming steps 8 through 12 as your
garage door opener may be equipped with
the “rolling code” feature.
(
2, 3 or 4). Do not release the buttons
until step 5 is completed.
Indicator lamp 1 will flash, first slowly and
then rapidly.
X Step 7: To program the remaining two
signal transmitter buttons, repeat the steps
above starting with step 3.
(
2, 3 or 4).
X Step 11: Press, hold for 2 seconds and
release same signal transmitter button a
second time to complete the training
process.
i Indicator lamp 1 flashes immediately
the first time the signal transmitter button
is programmed. If this button has already
Rolling code programming
To train a garage door opener (or other rolling
been programmed, the indicator lamp will code devices) with the rolling code feature,
start flashing after 20 seconds.
follow these instructions after completing the
“Programming” portion (steps 1 through 6) of
this text. A second person may make the
following training procedures quicker and
easier.
i Some garage door openers (or other
rolling code equipped devices) may require
you to press, hold for 2 seconds and
release the same signal transmitter button
a third time to complete the training
process.
X Step 5: After indicator lamp 1 changes
from a slow to a rapidly flashing light,
release the hand-held remote control
button and the signal transmitter button.
X Step 6: Press and hold the just-trained
signal transmitter button (2, 3 or 4) and
observe indicator lamp 1.
If indicator lamp 1 stays on constantly,
programming is complete and your device
should activate when the respective signal
X Step 8: Locate the “training” button on the
garage door opener motor head unit.
X Step 12: Confirm the garage door
operation by pressing the programmed
signal transmitter button (2, 3 or 4).
X Step 13: To program the remaining two
signal transmitter buttons, repeat the steps
above starting with step 3.
i Exact location and color of the button may
vary by garage door opener brand.
Depending on manufacturer, the “training”
button may also be referred to as “learn”or
“smart” button. If there is difficulty locating
Z
247
| Categories | Mercedes-Benz C-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz C-Class, Mercedes-Benz C250, Mercedes-Benz C300, Mercedes-Benz C350, Mercedes-Benz C63 AMG, Mercedes-Benz W204 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Automotive readers have rated 2009 Mercedes-Benz C-Class Operators Manual C230 C300 4MATIC C350 Sport C63 AMG 4.5 out of 5.0 based on 4 product reviews. I have the French version and needed English ver. C300 2009.
Thank you
Great review...can't get any better.
PDF is good to have on your phone.
Thank you for share the manual
Thank you for the owners manual, much appreciated.