Controls in detail
Wipers
display, indicating that the rear window
wiper is deactivated.
before attempting to remove any
blockage.
X Wiping with washer fluid: Turn and hold
rear window wiper switch 1 in position
RRemove blockage.
RTurn the windshield wipers on again.
%
or ) until the rear window is clean.
If the windshield wipers fail to function at
all with the combination switch in position
U orV,
For information on filling up the washer
reservoir, see “Washer system and headlamp
cleaning system” (Y page 251).
6
Rear window wiper indicator
X Switch on the ignition.
Rset the combination switch to the next
higher wiper speed
The rear window wiper engages automatically
when the automatic transmission is shifted
into reverse gear R with the windshield wipers
switched on.
Problems with wipers
Rhave the windshield wipers checked at
the nearest authorized Mercedes-Benz
Center
!
If anything blocks the windshield wipers
(leaves, snow, etc.), switch them off
immediately.
For safety reasons, stop the vehicle in a
safe location, and
X Activating intermittent wiping: Turn rear
window wiper switch 1 to position &.
In the lower multifunction display you will
see rear window wiper indicator 6,
indicating that the rear window wiper is
activated.
R-
remove the SmartKey from the starter
switch
or
X Deactivating intermittent wiping: Turn
rear window wiper switch 1 to position
-
-
turn off the engine by pressing the
KEYLESS-GO start/stop button and
open the driver’s door (with the
driver’s door open, starter switch is in
position 0, same as with SmartKey
removed from starter switch)
(.
Indicator 6 for the rear window wiper is
cleared from the lower multifunction
engage the parking brake
124
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)