Practical hints
Flat tire
Removing the wheel
Attaching the spare wheel
G Warning!
Inflate collapsible tire only after the wheel
is properly attached.
Inflate the collapsible tire using the electric
air pump before lowering the vehicle.
G Warning!
Always replace wheel bolts that are
damaged or rusted.
X Turn ratchet 4 up and down until jack 3
Never apply oil or grease to wheel bolts.
is fully seated in take-up bracket 2 and the 1 Alignment bolt
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact
an authorized Mercedes-Benz Center or
call Roadside Assistance.
jack base evenly meets the ground
X Unscrew uppermost wheel bolt and remove
X Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the ground.
it.
X Replace this wheel bolt with alignment bolt
supplied with the vehicle tool kit.
1
Incorrect wheel bolts or improperly
X Remove the remaining bolts.
tightened wheel bolts can cause the wheel
to come off. This could cause an accident.
Be sure to use the correct wheel bolts.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the wheel
bolts and wheel hub threads.
G Warning!
Only use genuine Mercedes-Benz wheel
bolts. Other wheel bolts may come loose.
X Remove the wheel.
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise the vehicle
could fall off the jack.
Z
369
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)