Controls in detail
Loading and storing
Installing the cargo net
Pulling the cargo net tight
1
2
Holder behind B-Pillar
Holder behind C-Pillar
Cargo net installed behind the C-pillar
Belt hook attached in the third-row footwell
RWith the cargo volume expanded in part
Y page 210), use holders behind C-pillars
and the cargo tie-down rings in the third-
1 Holder
1 Belt hook
2 Cargo tie-down ring
3 Tightening belt
(
2
2
3
Cargo net bar
Cargo net bar
row footwell (Y page 209).
X Hang cargo net bar 2 on holder 1
indicated by the arrow.
as
X Hook belt hook 1 into cargo tie-down ring
2 in direction of arrow.
RWith the cargo volume fully expanded
(
1
Y page 211), use holders behind B-pillars
and the cargo tie-down rings in the
X Push cargo net bar 2 forward into holder X Pull tightening belt 3 by the loose end in
1 in direction of arrow.
direction of arrow until the cargo net is
pulled tight.
second-row footwell (Y page 209).
X Engage cargo net bar 3.
X Open the hook and loop fasteners on the
cargo net package.
X After driving a short distance, make sure
the cargo net is still tight and, if necessary,
pull it tight again.
The cargo net bar must engage audibly.
X Roll out the cargo net.
X Unfold the cargo net.
X Engage the lower cargo net bar.
The cargo net bar must engage audibly.
218
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)