Practical hints
Flat tire
X On wheel to be changed, loosen but do not ! Do not position the jack on the body of
yet remove the wheel bolts (approximately
the vehicle, as this may cause damage to
one full turn with wrench 1).
the vehicle.
Changing wheel on passenger side (example
illustration)
X Place the wheel chock and another sizeable
object in behind both wheels on the side
opposite to the side on which the wheel is
to be changed.
2 Take-up bracket
The jack take-up brackets are located directly
behind the front wheel housings and in front 3 Jack
4 Ratchet
of the rear wheel housings.
G Warning!
X Attach reversible ratchet 4 to jack 3
such a way that the word UP can be seen.
in
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets.
Make sure the jack arm is fully seated in the
jack take-up bracket.
If you do not position the jack correctly in
the jack take-up bracket, the vehicle can
fall off the jack and seriously or fatally injure
you or others.
X Place jack 3 on firm ground.
X Position jack 3 under take-up bracket
2 so that it is always vertical as seen from
the side, even if the vehicle is parked on an
incline.
1
Wheel wrench
368
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)