Controls in detail
Loading and storing
X Pull release handle 2.
Rbraking
4 Anchorage point (position 1)
The front part of center console 1 is
released from base 3.
5 Anchorage point (position 0)
Rvehicle maneuvers
Ran accident
X Lift center console 1 in direction of arrow
4
and hold it there.
You can install the rear center console in two
different positions. In the most forward
position (position 1) you can expand the
cargo compartment fully (Y page 211)
without removing the rear center console.
X While holding center console 1 up, grip
handle 5.
X Lift center console 1 at rear handle 5
release the center console from anchorage
to
i The storage compartment and the cup
holders in the rear center console are only
illuminated, when the rear center console
is installed in the most rearward position
(position 0).
points 6.
X Take center console 1 out of the vehicle.
3 Rear center console base
i Rear center console base 3 cannot be
removed.
6 Rear center console
X Position center console 6 above base
Installing
3
.
G Warning!
X Insert the tabs at rear of center console
6
3.
into anchorage points 4 or 5 on base
The rear center console must be properly
installed on the center console base.
Driving with the rear center console not
properly installed on the rear center
console base may cause the rear center
console to come loose and be thrown
around in the vehicle interior, causing injury
to vehicle occupants during
X Guide front of center console 6 down
towards base 3.
Center console 6 must rest on base 3.
X Press down on front of center console 6
until it audibly engages in latch 1 or 2.
1
2
3
Latch (position 1)
Latch (position 0)
Rear center console base
Z
223
| Categories | Mercedes-Benz Manuals, Mercedes-Benz R-Class Manuals |
|---|---|
| Tags | Mercedes Benz R350, Mercedes Benz R350 BlueTEC, Mercedes Benz V251 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)