Driving your vehicle
MANUAL TRANSAXLE
Using the clutch
The clutch pedal should be depressed all
the way to the floor before:
WARNING
Before leaving the driver’s seat,
always make sure the shift lever is
in 1st gear when the vehicle is
- Starting the engine
The engine will not start without
depressing the clutch pedal. (vehicles
equipped with engine start/stop button)
parked on a uphill and in
R
(Reverse) on a downhill, set the
parking brake, and place the igni-
tion switch in the LOCK/OFF posi-
tion. Unexpected vehicle movement
may occur if these precautions are
not followed.
-
Shifting
When releasing the clutch pedal, release
it slowly. The clutch pedal should always
be released while driving.
OBA053003
Manual transaxle operation
To shift to R (Reverse), make sure the
vehicle has completely stopped, and
then move the shift lever to neutral before
moving into R (Reverse).
When you've come to a complete stop
and it's hard to shift into 1st gear or R
(Reverse):
CAUTION
To prevent unnecessary wear or
damage to the clutch:
• Do not rest your foot on the
clutch pedal while driving.
Do not hold the vehicle with the
clutch on an incline, while waiting
for the traffic light, etc.
Always depress the clutch pedal
down fully to prevent noise or
damage.
The manual transaxle has five forward
gears.The transaxle is fully synchronized
in all forward gears so shifting to either a
higher or a lower gear is easily accom-
plished.
•
1.
Put the shift lever in neutral and
release the clutch pedal.
•
2.
Depress the clutch pedal, and then
shift into first or R (Reverse) gear.
✽
NOTICE
During cold weather, shifting may be
difficult until the transaxle lubricant
has warmed up.
5
11
| Categories | Hyundai Manuals, Hyundai i10 Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, i10 |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)