2016 Hyundai I10 Owners Manual

Maintenance
4.
Tire ply composition and material
7. Uniform tire quality grading
WARNING - Tire age
The number of layers or plies of  rub-     Quality grades  can be  found  where
ber-coated fabric are  in the tire. Tire     applicable     on   the    tire   sidewall
manufacturers also must indicate the     between  tread  shoulder  and  maxi-
materials  in  the  tire,  which include      mum section width.
steel,  nylon,  polyester,  and  others.
The letter  "R" means radial  ply con-
struction; the letter "D" means diago-
nal or  bias ply construction; and  the
Tires  degrade  over  time,  even
when they  are  not being  used.
Regardless   of   the  remaining
tread, we recommend  that tires
generally  be replaced  after  six
For example:
TREADWEAR 200
TRACTION AA
(
6)   years  of   normal   service.
Heat caused  by not climates  or
frequent   high   loading   condi-
tions  can accelerate  the  aging
process.  Failure  to  follow  this
Warning  can  result  in  sudden
tire failure,  which could lead  to
a  loss  of control  and  an  acci-
dent involving serious  injury or
death.
letter "B" means belted-bias ply con-      TEMPERATURE A
struction.
Tread wear
5.
Maximum permissible inflation
pressure
The tread wear  grade is a compara-
tive rating based on  the wear rate of
the tire when tested under controlled
conditions  on   a  specified   govern-
ment test course. For example, a tire
graded  150 would  wear  one-and-a-
half times  (1½)  as well  on the  gov-
ernment course as a tire graded 100.
The  relative   performance   of  tires
depends upon  the actual  conditions
of   their   use,   however,  and   may
depart  significantly   from  the  norm
due  to  variations  in  driving  habits,
service  practices and  differences in
road characteristics and climate.
This number  is the greatest  amount
of air pressure  that should be  put in
the tire. Do not exceed the maximum
permissible inflation pressure.  Refer
to the  Tire and  Loading Information
label   for    recommended    inflation
pressure.
6.
Maximum load rating
This number indicates the  maximum
load  in  kilograms  and  pounds  that
can  be   carried  by  the   tire.  When
replacing  the  tires   on  the  vehicle,
always use  a tire that  has the same
load  rating  as  the  factory  installed
tire.
7
49
Product Specification
Categories Hyundai Manuals, Hyundai i10 Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 343 pages
Document TypeOwners Manual
LanguageEnglish
Product BrandHyundai, i10
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field