ENGINE
6.
7.
Apply a thin coating of Bostik 1775 or
equivalent impact adhesive to mating surfaces
of rocker cover and gasket.
Allow adhesive to cure, then fit gasket to rocker
cover.
Rocker shaft - refit
1.
2.
Lubricate pushrods with engine oil.
Fit pushrods in removed order.
CAUTION: Gasket fits one way round only,
it must be fitted accurately as subsequent
movement will destroy bonding.
8.
9.
Fit rocker cover to cylinder head, fit screws and
tighten to correct torque.
CAUTION: The 2 short screws must be
fitted on side of cover nearest centre of
engine.
LH rocker shaft only: Align dipstick tube to
rocker cover, fit and tighten screw.
3.
Fit each rocker shaft assembly, ensuring
identification groove is uppermost and towards
front of engine on RH side and towards rear of
engine on LH side.
CAUTION: Incorrect fitment will result in
an oil feed restriction.
4.
5.
Fit bolts and tighten to correct torque.
Clean gasket surface in rocker cover using
Bostik cleaner 6001 or equivalent, and allow to
dry.
OVERHAUL
3
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | 3.5, 3.9 and 4.2 Litre V8 engines |
| Product Brand | Land Rover |
| Engine Manufacturer | Rover Group |
| Engine Motor Size | 3.5L, 3.9L, 4.2 Litre |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)