ENGINE
Oil pump - refit
1.
2.
Lubricate rotors, oil pump drive gear, cover
plate and housing with engine oil.
Assemble rotors in housing ensuring that
reference marks are aligned.
3.
4.
Position cover plate to housing.
Apply Loctite 222 to threads of cover plate
screws, fit but do not fully tighten screws.
Position drive gear in oil pump, tighten cover
plate screws to correct torque.
5.
6.
Fit timing cover.
6.
7.
Place a straight edge across housing.
Using feeler gauges, check clearance between
straight edge and rotors:
Oil pressure relief valve - refit
Maximum clearance = 0.1 mm
1.
2.
3.
Lubricate new ’O’ ring with engine oil and fit to
relief valve plug.
Lubricate relief valve spring, piston and piston
bore with engine oil.
Assemble piston to relief valve spring, insert
piston and spring into piston bore.
Fit relief valve plug, depress plug and fit circlip.
Ensure circlip is fully seated in groove.
Oil pressure relief valve - inspection
1.
2.
Clean relief valve components and piston bore
in timing cover.
Check piston and bore for scoring and that
piston slides freely in bore with no perceptible
side movement.
4.
5.
3.
Check relief valve spring for damage and
distortion; check spring free length:
Spring free length = 60.0 mm
OVERHAUL
19
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | 3.5, 3.9 and 4.2 Litre V8 engines |
| Product Brand | Land Rover |
| Engine Manufacturer | Rover Group |
| Engine Motor Size | 3.5L, 3.9L, 4.2 Litre |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)