ENGINE
OIL PUMP - ENGINE NUMBERS WITH SUFFIX B
Oil pump - refit
CAUTION: Overhaul procedures for the oil
pump and oil pressure relief valve are
limited to carrying out dimensional
checks. In the event of wear or damage being
found, a replacement timing cover assembly
must be fitted.
1.
Lubricate relief valve, spring, and bore in
housing with clean engine oil.
Fit relief valve and valve spring.
Fit new sealing washer to plug, fit plug and
tighten to correct torque.
2.
3.
4.
Pack oil pump housing with Petroleum Jelly.
CAUTION: Use only Petroleum Jelly, no
other grease is suitable.
Oil pump - remove
1.
Remove timing cover.
5.
Fit oil pump gears ensuring that Petroleum
Jelly is forced into every cavity between teeth
of gears.
CAUTION: Unless pump is fully packed
with Petroleum Jelly it may not prime itself
when the engine is started.
6.
7.
Fit new pump cover gasket.
Position cover, fit bolts and tighten
progressively to correct torque.
Fit oil cooler adapter.
Fit timing cover.
8.
9.
10.
11.
Fit distributor.
Fit sump.
2.
3.
Remove oil pump drive gear.
Remove 9 screws securing cover plate,
remove plate.
4.
Make suitable alignment marks on inner and
outer rotors, remove rotors.
OVERHAUL
17
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | 3.5, 3.9 and 4.2 Litre V8 engines |
| Product Brand | Land Rover |
| Engine Manufacturer | Rover Group |
| Engine Motor Size | 3.5L, 3.9L, 4.2 Litre |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)