ENGINE
DRIVE PLATE AND RING GEAR ASSEMBLY
Drive plate and ring gear assembly - remove
Drive plate and ring gear assembly - refit
CAUTION: To prevent distortion to flexible
drive plate when bolted to torque
1.
Mark each component to enable reassembly in
original position.
converter, drive plate setting height must
be checked as follows:
2.
3.
Remove 4 bolts securing drive plate.
Remove clamp ring, flexible drive plate, hub
aligner and ring gear assembly.
4.
Remove 6 socket head screws securing
crankshaft adapter plate, remove adapter plate
and selective shim.
Inspect
1.
2.
3.
Fit existing shim and crankshaft adapter plate.
Fit socket head screws and lightly tighten.
Fit ring gear assembly, hub aligner, drive plate
and clamping ring, fit bolts and lightly tighten.
Check the setting height.
Drive plate setting height A = 8.08 to 8.20 mm.
Remove bolts, remove clamp ring, flexible
drive plate, hub aligner and ring gear
assembly.
1.
Inspect flexible drive plate for cracks and
distortion.
2.
3.
Renew drive plate if necessary.
Inspect ring gear for worn, chipped and broken
teeth.
4.
5.
4.
Renew ring gear assembly if necessary.
6.
Remove socket head screws, remove
crankshaft adapter and shim.
OVERHAUL
27
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | 3.5, 3.9 and 4.2 Litre V8 engines |
| Product Brand | Land Rover |
| Engine Manufacturer | Rover Group |
| Engine Motor Size | 3.5L, 3.9L, 4.2 Litre |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)