ENGINE
Engine numbers without suffix B
9. Using sequence shown, tighten cylinder head
bolts to:
Stage 1 - Correct torque
Stage 2 - 90°
Stage 3 - Further 90°
All engines
10.
Fit rocker shaft assembly.
TIMING CHAIN AND GEARS
Distributor - remove
NOTE: RH cylinder head illustrated
1.
Remove distributor cap.
6.
7.
Fit cylinder head bolts:
Long bolts: 1, 3 and 5.
Medium bolts: 2, 4, 6, 7, 8, 9, and 10.
Short bolts: 11, 12, 13 and 14.
Using sequence shown, progressively tighten
cylinder head bolts to correct torque.
2. Rotate crankshaft until centre line of rotor arm
is aligned with No. 1 spark plug segment in
distributor cap and No. 1 piston is at TDC.
Engine numbers with suffix B
3.
Scribe an alignment mark between distributor
body and clamp.
4.
5.
6.
7.
Remove nut securing distributor clamp.
Remove distributor.
Remove clamp.
Remove and discard ’O’ ring from distributor.
NOTE: RH cylinder head illustrated
8.
Fit new cylinder head bolts:
Long bolts: 1, 3 and 5
Short bolts: 2, 4, 6,7, 8, 9 and 10
NOTE: There are no bolts fitted in the four
lower holes in each cylinder head.
OVERHAUL
9
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | 3.5, 3.9 and 4.2 Litre V8 engines |
| Product Brand | Land Rover |
| Engine Manufacturer | Rover Group |
| Engine Motor Size | 3.5L, 3.9L, 4.2 Litre |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)