ENGINE
5.
6.
Apply EXP16A (Marston Lubricants) lubricant
to threads of main bearing cap bolts.
Lubricate main bearing shells and fit numbers
1
to 4 bearing caps, fit and lightly tighten bolts.
NOTE: Seal protector LRT-12-095
illustrated.
7.
Fit side seals to rear main bearing cap.
CAUTION: Seals must protrude
approximately 1.5 mm above bearing cap
face.
15.
16.
Position seal protector to crankshaft.
Engine numbers without suffix B: Fit oil seal
squarely using hand pressure only until fully
seated in recess.
Engine numbers with suffix B: Fit seal using
tool LRT-12-091.
Tighten main bearing cap bolts to correct
torque.
Fit Woodruff key to crankshaft.
Check crankshaft end-float.
Fit big-end bearings.
8.
9.
Apply Hylomar SQ32M jointing compound to
bearing cap rear mating face on cylinder block.
Lubricate bearing shell and side seals with
clean engine oil, carefully fit bearing cap
assembly.
Fit bolts and lightly tighten.
Clean seal location and running surface on
crankshaft.
17.
18.
19.
20.
21.
22.
23.
10.
11.
Fit timing cover and gears.
Fit flywheel or drive plate and ring gear
assembly.
12.
13.
14.
Engine numbers without suffix B: Clean seal
protector LRT-12-010 and lubricate with engine
oil.
Engine numbers with suffix B: Clean seal
protector LRT-12-095 and lubricate with engine
oil.
Lubricate oil seal lip with engine oil.
32
OVERHAUL
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | 3.5, 3.9 and 4.2 Litre V8 engines |
| Product Brand | Land Rover |
| Engine Manufacturer | Rover Group |
| Engine Motor Size | 3.5L, 3.9L, 4.2 Litre |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)