ENGINE
6.
7.
Engine numbers without suffix B: Locate
slotted adaptor to oil pump drive shaft tongue.
Check that centre line of rotor arm is aligned
with No.1 spark plug segment in distributor cap
and reference marks on distributor body and
clamp are aligned; reposition distributor if
necessary.
OIL COOLER ADAPTER - ENGINE NUMBERS
WITHOUT SUFFIX B
Oil cooler adapter - remove
1.
Remove oil filter element.
8.
9.
Remove rotor arm.
Rotate distributor to position pick-up opposite
nearest reluctor tooth.
2.
Mark position of adapter in relation to oil pump
cover.
3.
4.
Remove centre screw and withdraw adapter.
Remove and discard sealing ring.
Oil cooler adapter - refit
10.
11.
Fit distributor clamp nut ensuring that
counterbored portion is towards clamp; tighten
nut.
Fit rotor arm.
1.
2.
Thoroughly clean adapter.
Position new sealing ring, fit adapter, ensuring
marks previously made line up, fit and tighten
centre screw.
3.
4.
Lubricate sealing ring of oil filter with engine oil.
Screw filter on to filter head until it seats then
tighten a further half-turn.
CAUTION: This distributor setting is to
enable engine to be started. When engine
is refitted, ignition timing must be set
using electronic equipment.
OVERHAUL
15
| Categories | Land Rover, Land Rover Discovery |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | 3.5, 3.9 and 4.2 Litre V8 engines |
| Product Brand | Land Rover |
| Engine Manufacturer | Rover Group |
| Engine Motor Size | 3.5L, 3.9L, 4.2 Litre |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)