Controls in detail
Lighting
Daytime running lamp mode
USA only
Locator lighting and night security illu-
mination
̈
Turn exterior lamp switch to
position M or U.
The high beam headlamps can also be ac-
tivated when driving with the daytime run-
ning lamp mode activated and exterior
lamp switch in position M.
For information on locator lighting and
night security illumination, see
(୴ page 151) and (୴ page 152).
When the engine is running, the low beam
headlamps are automatically switched on.
In low ambient light conditions the parking
lamps will also switch on.
To activate the daytime running lamp
mode, see “Setting daytime running lamp
mode (USA only)” (୴ page 151).
Switching on front fog lamps
̈ Make sure that the low beam head-
lamps are switched on.
Canada only
i
When you shift from a driving position to
position N or P, the low beam switches off
(with a three-minute delay).
̈ Pull out exterior lamp switch to first
stop.
See notes on the exterior lamp switch
(୴ page 120).
The green indicator lamp ‡ in the
lamp switch lights up.
For nighttime driving you should turn the
exterior lamp switch to position B to
permit activation of the high beam head-
lamps.
i
Fog lamps will operate with the parking
lamps and/or the low beam headlamps
on. Fog lamps should only be used in
conjunction with low beam headlamps.
Consult your State or Province Motor
Vehicle Regulations regarding allow-
able lamp operation.
122
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
---|---|
Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
Model Year | 2003 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanks for making this available
Comments are closed.