Controls in detail
Useful features
Programming or reprogramming the in-
tegrated remote control
̈ To program the remaining two buttons,
Exact location and color of the button
may vary by garage door opener brand.
If there is difficulty locating the trans-
mitting button, refer to garage door
opener operator’s manual.
repeat the above steps.
̈
Turn SmartKey in the starter switch to
position 1 or 2.
i
If, after several attempts, you do not
successfully program the integrated re-
mote control device to learn the signal
of the hand-held transmitter, the ga-
rage door opener could be equipped
with the “rolling code feature.”
̈
Hold the end of the hand-held transmit-
ter of the device you wish to train
approximately 2 to 5 inches (5 cm to
̈
Press “training” button on the garage
door opener motor head unit.
12
cm) away from the surface of the in-
The “training light” is activated.
tegrated remote control located on the
inside rear view mirror, keeping the in-
dicator lamp in view.
You have 30 seconds to initiate the follow-
ing step.
Rolling code programming
̈
Firmly press and release the pro-
grammed integrated remote control
transmit button.
̈
Using both hands, simultaneously push
the hand-held transmitter button and
the desired integrated remote control
button. Do not release the buttons until
completing next step.
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion of
this text. (A second person may make the
following training procedures quicker and
easier.)
̈
Press and release same button a sec-
ond time to complete the training pro-
cess.
The indicator lamp on the integrated re-
mote control will flash, first slowly and
then rapidly. The rapid flashing lamp indi-
cates successful programming of the new
frequency signal.
Some garage door openers may require
you to do this procedure a third time to
complete the training.
̈
Locate training button on the garage
door opener motor head unit.
̈
Confirm the garage door operation by
pressing the programmed button on
the integrated remote control transmit-
ter.
̈
When the indicator lamp flashes rapid-
ly, release both buttons.
246
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2003 Mercedes-Benz S430 4MATIC S500 4MATIC S55 AMG Owners Manual 5.0 out of 5.0 based on 1 product reviews. Thanks for making this available
Comments are closed.