Practical hints
Where will I find ...?
Removing the spare wheel
Spare wheel S 430, S 500 and S 600
(except Sport Package*)
Warning!
G
̈
Take out the vehicle tool kit tray 2.
The spare wheel rim is mounted with a full
sized tire of the same type as on the vehi-
cle, and it is fully functional.
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
̈ Loosen the luggage bowl 3. To do so,
turn the luggage bowl counterclock-
wise
However, that spare wheel rim is weight
optimized and has a limited service life of
12000 miles (20000 km) use before a
standard wheel rim must replace it.
̈
Remove the spare wheel 4.
Storing the spare wheel
̈ Place spare wheel 4 in wheel well.
In case of flat tire, you may temporarily use
the spare wheel.
̈
Secure the spare wheel. To do so, turn
the luggage bowl 3 clockwise to its
stop.
Do not operate vehicle with more than one
spare wheel mounted.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface. Make sure that the jack
arm is fully seated in the jack take-up brack-
et. Always lower the vehicle onto sufficient
capacity jackstands before working under
the vehicle.
̈
Place vehicle tool kit tray 2 in luggage
bowl.
324
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
---|---|
Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
Model Year | 2003 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanks for making this available
Comments are closed.