Getting started
Driving
Wiping with windshield washer fluid
Problems while driving
The coolant temperature is over 248°F
(120°C)
̈
Push switch in the direction of arrow 1
past the resistance point.
The engine runs erratically and misfires
The coolant is too hot and is no longer
cooling the engine.
The windshield wiper operates with
washer fluid.
An ignition cable may be damaged.
ț
ț
̈ Stop the vehicle as soon as possible
and turn off the engine. Allow engine
and coolant to cool.
The engine electronics may not be op-
erating properly.
!
If leaves, snow, etc. block the wind-
shield wipers, switch off the wipers.
ț
Unburned gasoline may have entered
the catalytic converter and damaged it.
̈
Check the coolant level and add cool-
ant if necessary (୴ page 268).
ț
ț
For safety reasons, withdraw
SmartKey from starter switch. Re-
move blockage.
̈ Give very little gas.
̈
Have the problem repaired by an au-
thorized Mercedes-Benz Center as
soon as possible.
Turn the windshield wipers on
again.
If windshield wipers fail to function at
all in switch position I:
ț
ț
Set the combination switch to the
next highest wiper speed.
Have the windshield wipers
checked at the nearest authorized
Mercedes-Benz Center.
48
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
---|---|
Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
Model Year | 2003 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanks for making this available
Comments are closed.