Practical hints
Flat tire
̈
̈
Keeping jack in this position, turn
crank 3 clockwise until the jack base
meets the ground. Make sure the jack
is vertical (plumb line).
Removing the wheel
Continue to turn the crank until the tire
is a maximum of 1.2 in (3 cm) from the
ground.
Warning!
G
1
2
3
Jack support tube hole
Jack arm
The jack is intended only for lifting the vehi-
cle briefly for wheel changes. It is not suited
for performing maintenance work under the
vehicle.
1
Alignment bolt
Crank
̈
Unscrew upper-most wheel bolt and re-
move.
̈
Insert jack arm 2 fully into tube hole 1
up to the stop.
̈
Replace this wheel bolt with alignment
bolt 1 supplied in the tool kit.
ț
Never start the engine when the vehicle
is raised.
Warning!
G
ț
Never lie down under the raised vehicle.
̈ Remove the remaining bolts.
Insert the jack arm fully into the jack sup-
port tube hole up to the stop. Otherwise the
vehicle may fall from the jack and cause per-
sonal injury or damage to the vehicle.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
̈
Remove the wheel.
341
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
| Model Year | 2003 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Automotive readers have rated 2003 Mercedes-Benz S430 4MATIC S500 4MATIC S55 AMG Owners Manual 5.0 out of 5.0 based on 1 product reviews. Thanks for making this available
Comments are closed.