Practical hints
Replacing bulbs
୴
୴̈ Insert the new bulb in the socket so
that the base is in the recess on the
lower left.
Replacing high beam bulbs
Front turn signal lamp bulb
̈ Switch off the lights.
̈
̈
̈
Switch off the lights.
Open the hood (୴ page 263).
̈ Open the hood (୴ page 263).
̈
̈
̈
Attach the retaining springs.
Press the tab on cover 2 and remove
cover.
̈ Twist bulb socket 8 counterclockwise
and pull out.
Insert connector 7 into the bulb.
Press cover 3 onto the housing until
̈
̈
Pull connector 6 off of the bulb.
̈ Gently push bulb into socket, turn
counterclockwise and remove.
the tab engages.
Apply pressure on the bulb contacts
from above until the bulb releases from
the retaining springs.
̈ Insert new bulb in socket, push in and
twist clockwise.
̈
̈
Remove bulb.
̈ Reinstall bulb socket in lamp and twist
clockwise until it engages.
Insert the new bulb in the socket with
the marking facing upward.
̈
Press the bulb upward on the contacts
until it engages in the retaining springs.
̈
̈
Insert connector 6 onto the bulb.
Press cover 2 onto the housing until
the tab engages.
334
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
---|---|
Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
Model Year | 2003 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanks for making this available
Comments are closed.