Controls in detail
Control system
Setting daytime running lamp mode
(USA only)
With daytime running lamp mode se-
lected and the exterior lamp switch at
position 0, the following lamps will
come on automatically when the en-
gine is turned on:
Setting locator lighting
During darkness, the following lamps will
come on when the exterior lamp switch is
in position U, the locator lighting fea-
ture is activated, and the vehicle is un-
locked by remote control:
̈
Move the selection marker with
the æ or ç button to the LIGHT-
ING submenu.
ț
Parking lamps and low beam head-
lamps
̈
Press button j or k repeatedly
until you see this message in the dis-
play: LAMP CIRCUIT HEADLAMP MODE .
ț
ț
ț
ț
Parking lamps
Tail lamps
ț
License plate lamps (in low ambient
light conditions)
The selection marker is on the current
setting.
License plate lamps
Front fog lamps
i
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
The locator lighting switches off when the
driver’s door is opened. It switches off au-
tomatically after a period of approximately
For safety reasons, resetting the
LIGHTING submenu to factory settings
40
seconds.
̈
Move the selection marker with
the æ or ç button to the LIGHT-
ING submenu.
(
୴ page 147) while driving will not re-
̈
Press æ or ç to select manual
or daytime running lamp (constant)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
set the daytime running lamp mode.
୴୴
In the display you will then see the mes-
sage: LIGHTING – CANNOT BE TOTALLY
RESET TO FACTORY SETTINGS WHILE
DRIVING.
151
Product Specification
Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
---|---|
Tags | Mercedes-Benz S430, Mercedes-Benz S500, Mercedes-Benz S55 AMG, Mercedes-Benz S600 |
Model Year | 2003 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Thanks for making this available
Comments are closed.