DO-IT-YOURSELF MAINTENANCE
G190A01A-GAT
G190B01TB-GAT
G200A01A-AAT
CHECKING DRIVE BELTS
CHECKING DRIVE BELTS
CHECKING AND REPLACING
FUSES
(Gasoline Engine)
(Diesel Engine)
Replacing a Fusible Link
Water Pump Pulley
Alternator
5.1~6
mm (0.2~0.24 in.)
Alternator
Power
steering
pump
Bad
Good
Alternator Pulley
Crankshaft Pulley
A/C comp.
G190B01O
SSA6190A
AS60310A
Drive belts should be checked periodically for
proper tension and adjusted if necessary. At the
same time, belts should be examined for cracks,
wear, fraying or other evidence of deterioration
and replaced if necessary.
Belt routing should also be checked to be sure
there is no interference between the belts and
other parts of the engine. After a belt is re-
placed, the new belt should be adjusted again
after two or three weeks to eliminate slack
resulting from initial stretching after use.
At the scheduled maintenance inspection, belts
should be examined for cracks, wear, fraying or
other evidence of deterioration and replaced if
necessary.
Belt routing should also be checked to be sure
there is no interference between the belts and
other parts of the engine.
A fusible link will melt if the electrical circuits
from the battery are ever overloaded, thus pre-
venting damage to the entire wiring harness.
(This could be caused by a short in the system
drawing too much current.) If this ever happens,
have a Hyundai dealer determine the cause,
repair the system and replace the fusible link.
The fusible links are located in a fuse box for
easy inspection.
CAUTION:
When replacing a fusible link, never use
anything but a new fusible link with the
same or lower amperage rating. Never use a
piece of wire or a higher-rated fusible link.
This could result in serious damage and
create a fire hazard.
6-19
Product Specification
Categories | Hyundai Manuals, Hyundai Matrix Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Matrix |
Document File Type | |
Copyright | Attribution Non-commercial |