DRIVING YOUR HYUNDAI
C020A01O-EAT
SC040A1-F
SC050A2-E
BEFORE STARTING THE ENGINE
Before you start the engine, you should al-
ways:
COMBINATIONIGNITIONSWITCHAND
STEERING LOCK
To Start the Engine
KEY POSITIONS
WARNING:
The engine must never be turned off and
the key removed from the ignition key
cylinder whilst the vehicle is in motion
since the steering lock will operate and
control of the vehicle will be lost.
o
If your Hyundai is equipped with a manual
transaxle, place the shift lever in neutral
and depress the clutch pedal fully.
1.
Look around the vehicle to be sure there
are no flat tyres, puddles of oil or water or
other indications of possible trouble.
After entering the car, check to be sure the
parking brake is engaged.
o
o
If your Hyundai has an automatic transaxle,
place the shift lever in "P" (park).
2.
3.
4.
5.
To start the engine, insert the ignition key
and turn it to the "START" position. Re-
lease it as soon as the engine starts. Do
not hold the key in the "START" position
for more that 15 seconds.
ACC
Check that all windows, and lights are
clean.
LOCK
ON
Check that the interior and exterior mirrors
are clean and in position.
Check your
headrestraint
seat,
seatback
to be sure they are in their
and
NOTE:
proper positions.
Close all doors.
Fasten your seat belt and be sure that all
other occupants have fastened theirs.
Turn off all lights and accessories that are
not needed.
When you turn the ignition switch to "ON"
check that all appropriate warning lights are
operating and that you have sufficient fuel.
For safety, the engine will not start if the
shift lever is not in "P" or "N" Position
(automatic transaxle).
6.
7.
START
C040A01E
8.
9.
"START"
The engine is started in this position. It will
crank until you release the key.
10.Check
the operation of warning lights and
all bulbs when key is in the "ON" position.
NOTE:
Do not hold the key in the "START" posi-
tion for more than 15 seconds.
WARNING: (DIESEL ENGINE)
To ensure that sufficient vacuum exists
within the brake system during cold weath-
er start-up conditions, it is necessary to
run the engine at idle for several seconds
after starting the engine.
"ON"
When the key is at the "ON" position, the
ignition and all accessories are available for
use. If the engine is not running, the key
2-
2
fcuk-2.p65
2
3/6/2007, 9:59 AM
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)