FEATURES OF YOUR HYUNDAI
B260D03O-AAT
5. REPEAT Button
o
Do not add any oil to the rotating parts.
Keep magnets, screwdrivers and other
metallic objects away from the tape
mechanism and head.
This equipment is designed to be used
only in a 12 volt DC battery system with
negative ground.
This unit is made of precision parts. Do
not attempt to disassemble or adjust any
parts.
When driving your vehicle, be sure to
keepthevolumeoftheunitsetlowenough
to allow you to hear sounds coming from
the outside.
1.
o
o
Playing CD
o
To repeat the track you are currently listen-
ing to, press the RPT button. To cancel ,
press again.
Insert the CD with the label facing upward.
Insert the CD to start CD playback, during
radio operation.
o
o
o
o
If you do not release RPT operation when
the track ends, it will automatically be re-
played.
o
o
When a disc is in the CD deck, if you press
the CD button, the CD player will begin
playing even if the radio is being used.
The CD player can be used when the igni-
tion switch is in either the "ON" or "ACC"
position.
This process will be continued until you
push the button again.
6. EJECT Button
When the EJECT button
CD loaded, the CD will eject.
is pressed with a
2.
FF/REW (
/
)
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF
o
Do not expose this equipment (including
the speakers) to water or excessive
moisture.
NOTE:
o
(
) or REW ( ) button.
If the CD does not operate properly or if
When you release the button, the compact disc
player will resume playing.
the ER2 fault code is displayed, use one
of two methods to reset the CD deck
function.
CAUTION:
Do not insert warped or poor quality discs
into the CD player as damage to the unit
may occur.
3.
TRACK UP/DOWN
-
Remove the audio fuse for 5 minutes.
Then, reinstall the audio fuse.
Disconnect the negative terminal of
the battery and wait 5 minutes.
Then reconnect the negative battery
terminal.
o
The desired track on the disc currently being
played can be selected using the track
number.
-
o
Press once to skip forward to the beginn-
ing of the next track. Press once to skip
back to the beginning of the track.
o
o
When replacing the fuse, replace it with
a fuse having the correct capacity.
The preset station frequencies are all
erased when the car battery is discon-
nected. Therefore, all data will have to
be set again if this should occur.
4.
o
SCAN Button
Press the SCAN button to playback the first
10 seconds of each track.
Press the SCAN button again within 10 sec.
When you have reached the desired track.
o
1-
75
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)