CONTROLS AND EQUIPMENT
SB090H1-E
B170A04A-EAT
HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT (Not all models)
WARNING:
CARE OF SEAT BELTS
o
The height adjuster must be in the locked
position when the vehicle is moving.
The misadjustment of height of the
shoulder belt could reduce the effec-
tiveness of the seat belt in a crash.
Seat belt assemblies must never be disas-
sembled or modified in any way. In addition,
care should be exercised to ensure that the belt
assemblies do not become damaged by being
trapped in seat mechanisms, door shuts etc.
o
SB090I-E
SB090P1-E
PeriodicInspection
SEAT BELTS (3-Point Type)
It is recommended that all seat belts be in-
spected periodically for wear or damage of any
kind. Parts of the system that are damaged
should be replaced as soon as possible. Under
no circumstances must any part of the seat belt
assemblies be dismantled or repaired.
To Fasten The Seat Belt
B170A01E-D
You can adjust the height of the shoulder belt
anchor to one of the 4 positions.
SB090J1-E
If the height of the adjusting seat belt is too
near your neck, you will not be getting the
most effective protection. The shoulder por-
tion should be adjusted so that it lies across
your chest and midway over your shoulder
nearest the door and not your neck.
To adjust the height of the seat belt anchor,
lower or raise the height adjuster into an
appropriate position. To raise the height ad-
juster, pull it up. To lower it, push it down while
pressing the height adjuster button.
Keep Belts Clean and Dry
Seat belts should be kept clean and dry. If
belts become dirty, they can be cleaned using
a mild soap solution and warm water. Bleach,
dye, strong detergents or abrasives should
not be used since the fabric may become
damaged and weakened.
SSD1090P
The seat belts are fastened by pulling the belt
buckle towards the seat belt stalk and insert-
ing the metal tongue of the buckle into the
stalk. The buckle should be firmly pressed
into the stalk until locked which will be indi-
cated by an audible "click".
The length of the seat belt webbing will be
automatically adjusted by the seat belt mech-
anism to allow the wearer maximum freedom
SB090K1-E
Replacement of Seat Belts
The entire seat belt assembly or assemblies
should be replaced if the vehicle has been
involved in an accident even if no damage is
evident. Additional questions concerning seat
belt operation should be directed to a Hyundai
Dealer.
Release the button to lock the anchor into
position. Try sliding the release button to
make sure that it has locked into the position.
1-
14
fcuk-1.p65
14
3/6/2007, 9:58 AM
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)