OWNER MAINTENANCE
SSA6060B
SSA6061C
SSA6062A
3
. Clean around the base of the plug to be
removed, and install the plug socket ensur-
ing that the ceramic insulator does not be-
come damaged. Turn the socket counter-
clockwise to remove the plug.
Prior to installing a sparking plug, the gap
between the centre and outer electrodes must
be checked and adjusted as necessary.
Adjustment is facilitated by bending the outer
electrode towards or away from the centre
electrode. Under no circumstances should at-
tempts be made to adjust the position of the
centre electrode.
5. Replace the plug lead ensuring that the
cap is pushed firmly into place. Confirm
that the cap is correctly seated by lightly
pulling upon it.
NOTE:
When replacing the spark plug, always
use the genuine parts recommended.
CAUTION:
Sparking plugs must only be cleaned using
purpose designed equipment. Wire brush-
ing may damage the centre electrode-
insulator causing misfiring to occur. Only
the correct grade of sparking plug should
be used. Use of an incorrect grade may
result in serious engine damage.
4. Insert the sparking plug into the cylinder
head and using a suitable plug socket,
slowly rotate the sparking plug, (being
careful not to cross-thread) until the plug
contacts the seating area.
Recommended Spark Plugs
CHAMPION
NGK
RC10YC4
BKR5ES-11
Tighten the plug with plug socket by a
further 1/2 to 3/4 of a furn only.
6-10
fcuk-6.p65
10
3/6/2007, 10:01 AM
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)