CONTROLS AND EQUIPMENT
B570A01FC-EAT
SB440A1-E
BONNET RELEASE
REMOTE FUEL FILLER FLAP
RELEASE (Not all models)
HFC2019
CAUTION:
HFC2018-D
Ensure that the bonnet prop has been
removed prior to closing the bonnet. Al-
ways check to ensure that the bonnet has
latched prior to setting the vehicle in mo-
tion.
HFC2015-D
Pull the release lever inside the vehicle to
unlatch the bonnet. At the front of the vehicle,
push the safety catch lever sidewards as
shown and raise the bonnet by hand. Support
the bonnet by means of the bonnet prop.
Before closing the bonnet, ensure that the
prop is correctly stowed. Lower the bonnet by
hand to a position of approximately 30cm from
the closed position and allow the bonnet to
drop. Do not attempt to close the bonnet by
lowering the panel to the closed position and
pressing upon the panel work since this may
result in damage to the panel.
The fuel filler flap may be opened from inside
the vehicle by pulling up on the fuel filler flap
release.
WARNING:
NOTE:
The bonnet prop must be correctly in-
serted into the panel to prevent the possi-
bility of injury arising from the bonnet
falling.
If the fuel filler flap will not open because
ice has formed around it, tap lightly or
push on it to break the ice and release it.
Do not lever the flap. If necessary, spray
around the flap with an approved deicer
fluid (do not use radiator anti-freeze) or
move the vehicle to a warm place and
allow the ice to melt.
1-
49
fcuk-1.p65
49
3/6/2007, 9:58 AM
| Categories | Hyundai Manuals, Hyundai Matrix Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Matrix |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)