2
DRIVING YOUR HYUNDAI
KEY POSITIONS
4
C040A01A-AAT
o "START"
The engine is started in this position. It
will crank until you release the key.
!
!
WARNING: (Diesel only)
WARNING:
To ensure that sufficient vacuum
exists within the brake system dur-
ing cold weather start-up condi-
tions, it is necessary to run the
engine at idle after starting accord-
ing to the following table.
The engine should not be turned
off or the key removed from the
ignition key cylinder while the ve-
hicle is in motion. The steering
wheel is locked by removing the
key.
NOTE:
Do not hold the key in the "START"
position for more than 15 seconds.
o "ON"
Ambient temp.
Warm up time
When the key is in the "ON" position,
the ignition is on and all accessories
may be turned on. If the engine is not
running, the key should not be left in
the "ON" position. This will discharge
the battery and may also damage the
ignition system.
Above -15°C (5°F) 3 min. or longer
Below -15°C (5°F) 6 min. or longer
ACC
After starting the engine, do not
drive the vehicle until the brake
LOCK
ON
vacuum warning light
ed off.
has turn-
o "ACC"
Failure to carry out the above pro-
cedure may result in the need to
apply greater pedal pressure in or-
der to effect the necessary braking
effort.
With the key in the "ACC" position,
someelectricalaccessories(radio,etc.)
may be operated.
START
o "LOCK"
The key can be removed or inserted in
this position.
C040A01E
To protect against theft, the steering
wheel locks by removing the key.
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)