DO-IT-YOURSELFMAINTENANCE
6
CHECKING BRAKE PEDAL
CLEARANCE
CHECKING DRIVE BELTS
29
G180A01A-GAT
G190A01HP-GAT
Diesel Engine (2.9 CRDi)
Gasoline Engine
Generator pulley Idler pulley Water pump pulley
Power steering pulley
Power
steering
pulley
Idler pulley
Tension pulley
Tension
pulley
71
mm (2.80 in.)
COMP. pulley
Auto tensioner
Generator
pulley
Crankshaft pulley
COMP. pulley
G190D01HP
Tension pulley
HHP5049
G180A01L
Tension pulley Crankshaft pulley
Drive belts should be checked peri-
odically for proper tension and ad-
justed if necessary. At the same time,
belts should be examined for cracks,
wear, fraying or other evidence of
deterioration and replaced if neces-
sary.
Belt routing should also be checked
to be sure there is no interference
between the belts and other parts of
the engine. After a belt is replaced,
the new belt should be adjusted again
after two or three weeks to eliminate
slack resulting from initial stretching
after use.
You need a helper to check the brake
pedal clearance. With the engine run-
ning, have your helper press down on
the brake pedal several times and
then hold it down with a force of about
Diesel Engine (2.5 TCI)
Water pump pulley
Tension pulley
490N
(50 kg, 110 lbs). The brake
Power
steering
pulley
pedal clearance is the distance from
the top surface of the brake pedal to
the asphalt sheeting under the floor
mat. If the brake pedal clearance is
not within the limits specified in the
illustration, have it inspected by your
Hyundai dealer and adjusted or re-
paired if necessary.
Generator
pulley
COMP. pulley
Crankshaft pulley
G190A01HR
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)