DO-IT-YOURSELFMAINTENANCE
6
25
G140B01A-AAT
Checking the Air Conditioning
Operation
G140D01HP-GAT
Checking the Compressor Drive
Belt
Diesel Engine (2.9 CRDi)
Generator pulley Idler pulley Water pump pulley
Power
steering
pulley
Gasoline Engine
1.
Start the engine and let it run at
fast idle for several minutes with
the air conditioning set at the maxi-
mum cold setting.
If the air coming out of the in-dash
vents is not cold, have the air con-
ditioning system inspected by your
Hyundai dealer.
Tension pulley
COMP.pulley
2.
COMP. pulley
Auto tensioner
Crank shaft pulley
Tension pulley
G140D03HP
When the air conditioning is being
used regularly, the compressor drive
belt tension should be checked at
least once a month.
!
CAUTION:
Crankshaft pulley
G140D01HP
Running the air conditioning sys-
tem for extended periods of time
with a low refrigerant level may
damage the compressor.
Diesel Engine (2.5 TCI)
To check the drive belt tension, press
down on the belt halfway between the
engine crankshaft and compressor
pulleys. Pressing with your finger, you
should not be able to deflect this belt
anymore than 8.0 mm. If you have
the instruments to check it with a
force of 98N (22 lb.), the deflection
should be approx. 8.0 mm (0.315
inches). If the belt is too loose, have
it adjusted by your Hyundai dealer.
Tension pulley
G140C01A-AAT
Lubrication
To lubricate the compressor and the
seals in the system, the air condition-
ing should be run for at least 10
minutes each week. This is particu-
larly important during cool weather
when the air conditioning system is
not otherwise in use.
COMP.pulley
Crankshaft pulley
G140D01HR
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)