DO-IT-YOURSELFMAINTENANCE
6
13
NOTE: Gasoline Engine Only
Before adding the coolant to the
radiator, unscrew the bolts on the
engine cover, remove the engine
cover and unscrew the flange bolt
for fitting water outlet to escape
the excess pressure. And if the
coolant overflows from the hole
while adding the coolant, screw
the bolt and continue to add the
coolant.
Diesel Engine (2.9 CRDi)
4. Check Section 9 for the capacity of
the cooling system in your car.
Then, following the manufacturer’s
directions on the engine coolant
container, add the appropriate
quantity of coolant to the radiator.
5.
Fill the radiator with clean deminer-
alized or distilled water. Continue
to add clean demineralized or dis-
tilled water in small quantities until
the fluid level stays up in the radia-
tor neck.
HHP5006
Gasoline Engine or Diesel Engine (2.5 TCI)
2.
3.
Turn the radiator cap counterclock-
wise without pressing down on it,
until it stops. This relieves any pres-
sure remaining in the cooling sys-
tem. And remove the radiator cap
by pushing down and turning coun-
terclockwise.
Be sure your drain receptacle is in
place. Open the drain cock on the
radiator. Allow all the engine cool-
ant to drain from the cooling sys-
tem, then securely close the drain
cock.
G050D01HP
HHP5008
| Categories | Â Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)