OWNERMAINTENANCE 6
33
HEADLIGHT AIMING AD-
JUSTMENT
G290A01HP-EAT
1. Keep all tyres inflated to the correct
pressure.
And then, draw a parallel line at 1.50
in. (38 mm) under the horizontal line in
case of adjusting the low beam or at
0.83 in. (21 mm) under the horizontal
line in case of adjusting the high beam.
<Low Beam>
2
. Place the vehicle on level ground
and press the front bumper & rear
bumper down several times. Place
vehicle at a distance of 118.1 in.
Vertical
aiming
(
3m) from the test wall.
. See that the vehicle is unloaded
except for full levels of coolant,
7. Adjust each cut-off line of the low
beam to the parallel line with a
phillips screwdriver - VERTICAL
AIMING.
8. Adjust each cut-off line of the low
beam to the each vertical line with
a phillips screwdriver - HORIZON-
TAL AIMING.
3
(
Horizontal
aiming
engine oil and fuel, and spare tyre,
jack, and tools). Have the driver or
equivalent weight placed in driver's
seat.
4. Clean the headlight lens and turn on
the headlight.
G290B01HP
<High Beam>
Horizontal
aiming
5.
6.
Open the bonnet.
Draw the vertical line (through the
centre of each headlight) and the
horizontal line (through the centre
of each headlight) on the aiming
screen.
Vertical
aiming
(1)
Horizontal line dimension from
ground :
Low Beam : 35.1 in.(894 mm)
High Beam : 33 in. (839 mm)
G290B02HP
Before performing aiming adjustment,
make sure of the following.
(2)
Distance between each vertical
line :
Low Beam : 51.8 in. (1,316 mm)
High Beam : 42.4 in. (1,076 mm)
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)