2
DRIVING YOUR HYUNDAI
12
C090I01HP-GAT
C090J01HP-DAT
OVERDRIVE SWITCH
Ifyouneedtoacceleraterapidly,press
the accelerator pedal all the way to the
floor. The transmission will automati-
cally shift to a lower gear, depending
on the speed.
!
CAUTION:
o Shift into "R" and "P" position
only when the vehicle has com-
pletely stopped.
NOTE:
o Do not accelerate the engine in
the reverse or any of the forward
positionswiththebrakesapplied.
o Alwaysapplythefootbrakewhen
shifting from "P" or "N" to "R",
"D", "2" or "L" position.
o Do not use the P(Park) position
in place of the parking brake.
Always set the parking brake,
shift the transmission into
P(Park) and turn off the ignition
when you leave the vehicle, even
momentarily.
Turn the overdrive switch on for
good fuel economy and smooth
driving. If engine braking is needed
in the "D" range or if repeated up-
shifting and downshifting between
the3rdand4thgearisneededwhen
climbing a gentle slope, it is recom-
mended that the overdrive switch
be turned off. Turn the overdrive
switch back on immediately after-
ward.
HHP3019
When the overdrive switch is turned
on, the transmission will automatically
upshift to the second, third and over-
drivegears.Whentheoverdriveswitch
is turned off, the transmission will not
upshift to the overdrive gear at all.
For normal driving, the selector lever
should be left in the "D" position and
the overdrive switch turned on.
Never leave the vehicle unat-
tended while the engine is run-
ning.
o Check the automatic transmis-
sion fluid level regularly, and add
fluid as necessary.
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)