6 OWNER MAINTENANCE
ENGINE OIL AND FILTER
REPLACEMENT
8
G040A02HP-EAT
severe or adverse conditions, the oil
and filter must be replaced more fre-
quently.
4. When the oil has drained from the
sump, replace the drain plug using a
new washer ensuring that the plug
is not over tightened.
Petrol Engine
Oil filler cap
To replace the oil and filter, proceed as
follows:
Tightening torque : 3.5 ~ 4.5 kgf.m
1.
Ensure that the engine is at normal
operating temperature and park the
vehicle on level ground with the
parking brake securely applied and
the engine turned off.
5.
6.
Remove the oil filter by rotating
counterclockwise, using a propri-
etary oil filter removal tool if neces-
sary. Note that the oil filter will
contain approximately 0.5 litres of
oil and this should be collected in a
suitable receptacle.
Install a new oil filter having
smeared the sealing ring with clean
oil and rotating clockwise until the
filter contacts the mounting and
then a further one half turn. Do not
over-tighten.
Oil filter
Drain plug
Diesel Engine
G040A01HP
2. Open the bonnet and remove the
oil filler cap.
3.
Oil filler cap
Prepare a suitable receptacle to
collect the displaced oil and re-
move the drain plug from the sump.
!
CAUTION:
The oil being drained from the en-
gine will be hot. Care should be
exercised to prevent scalding.
Tightening torque:
Petrol Engine - 1.2 ~ 1.6 kgf.m
Diesel Engine - 2.3 ~ 2.5 kgf.m
Oil filter
Drain plug
HHP5004
7.
8.
Remove the engine oil level dipstick.
Pour the specified quantity of the
recommended oil into the engine
and replace the filler cap. Start the
The engine oil and filter must be
changed at the time or mileage interval
specified in the maintenance sched-
ule. If the vehicle is operated under
| Categories | Hyundai Manuals, Hyundai Terracan Manuals |
|---|---|
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Terracan |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)