2 DRIVING YOUR HYUNDAI
4
KEY POSITIONS
SC050A1-E
NOTE:
Do not hold the key in the "START"
position for more than 15 seconds.
!
WARNING: (Diesel only)
!
WARNING:
To ensure that sufficient vacuum
exists within the brake system dur-
ing cold weather start-up condi-
tions, it is necessary to run the
engine at idle after starting accord-
ing to the following table.
Theenginemustneverbeturnedoff
and the key removed from the igni-
tionkeycylinderwhilstthevehicleis
inmotionsincethesteeringlockwill
operate and control of the vehicle
will be lost.
"ON"
When the key is at the "ON" position,
the ignition and all accessories are
available for use. If the engine is not
running, the key should not be left at
this position since the battery will be-
come discharged and damage to the
ignition system may also result. For
information regarding engine starting,
refer to "STARTING THE ENGINE".
Ambient temp.
Warm up time
Above 5°F (-15°C) 3 min. or longer
Below 5°F (-15°C) 6 min. or longer
ACC
LOCK
ON
After starting the engine, do not
drive the vehicle until the brake
"ACC"
vacuumwarninglight
off.
hasturned
When the ignition key is at the "ACC"
position, the radio and other accesso-
ries may be used.
Failure to carry out the above pro-
cedure may result in the need to
apply greater pedal pressure in or-
der to effect the necessary braking
effort.
START
"LOCK"
The ignition key may only be inserted
or removed at this position.
C040A01E
"START"
The engine is started in this position. It
will crank until you release the key.
NOTE:
The ignition key can only be re-
moved if the transmission selector
is at the "P" position (automatic
transmission only).
Product Specification
Categories | Hyundai Manuals, Hyundai Terracan Manuals |
---|---|
Download File |
|
Document Type | Owners Manual |
Language | English |
Product Brand | Hyundai, Terracan |
Document File Type | |
Copyright | Attribution Non-commercial |