Controls in detail
Transfer case
Switching from LOW to HIGH
Messages in the multifunction display
ț TC SHIFT – CANCELLED
If a shift was not completed and the multi-
function display shows one of the following
messages:
The shift did not take place.
̈ Repeat the shift procedure.
ț TRANSFER CASE – VISIT WORKSHOP!
!
The shift procedure can only be per-
formed when:
ț TC SHIFT CONDITIONS NOT FULFILLED
ț
ț
The engine is running.
There may be a malfunction in the
system.
The shift did not take place. At least
one shift condition was not met.
The gear selector lever for the auto-
matic transmission is in position N.
̈
̈
Repeat the shift procedure.
̈
Repeat the shift procedure.
ț
ț
The vehicle is not at standstill.
If the shift procedure still does not take
place, have the vehicle checked at an
authorized Mercedes-Benz Light Truck
Center as soon as possible.
ț TC IN NEUTRAL
The vehicle speed does not exceed
4
0 mph (70 km/h).
The shift did not take place. The trans-
fer case is in neutral. The gear
positionN is displayed in transfer case
indicator 1.
̈
Press lower half (“HIGH”) of the trans-
fer case switch.
i
If the SmartKey is in starter switch
position 0 or 1, an alarm will sound if
the transfer case is in position N and
the driver’s door is opened.
̈ Repeat the shift procedure.
Once the shift is complete, gear
positionH is displayed in the transfer
case indicator.
Warning!
G
i
Engage transfer case to gear position
HIGH or LOW.
If TC is in neutral, transmission position P
will not hold vehicle. The parking brake must
be applied to hold vehicle in place.
If the shift procedure does not take
place press lower half (“HIGH”) of the
transfer case switch again.
For more information, see “Practical hints”
section (୴ page 319).
̈
Put gear selector in D.
155
Product Specification
Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
---|---|
Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
Model Year | 2005 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |