Getting started
Driving
Automatic transmission
Starting
Starting difficulties
̈
Place the gear selector lever in
position P.
If the engine does not start as described,
carry out the following steps:
̈
̈
Do not depress the accelerator.
̈ Turn SmartKey in starter switch to
position 0 and repeat starting proce-
dure.
Turn the SmartKey in the starter switch
to position 3 and hold until the engine
starts (୴ page 35).
̈ Remember that extended starting at-
tempts can drain the battery.
i
̈
Get a jump start (୴ page 354).
You can also use the “touch-start”
function. Turn the SmartKey to
position 3 and release it again immedi-
ately. The engine then starts automati-
cally.
If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
̈
Notify an authorized Mercedes-Benz
Light Truck Center.
Gearshift pattern for automatic
transmission
̈
Depress the brake pedal.
P Park position with gear selector lever
The gear selector lever lock is released.
lock
R Reverse gear
N Neutral
For information on turning off the engine,
see “Turning off engine” (୴ page 58).
D Drive position
For more information, see “Automatic
transmission” (୴ page 148).
49
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)