Operation
Engine compartment
Checking engine oil level with the
control system
̈ Press button k or j on the
steering wheel until the following
message is seen in the multifunction
display:
ț ADD 1.5 Qts. TO
REACH MAX. OIL LEVEL!
When checking the oil level
(Canada: 1.5 LITERS)
ț
the vehicle must be parked on level
ground
ț ADD 2.0 Qts. TO
REACH MAX. OIL LEVEL!
ENGINE OIL LEVEL
MEASURING NOW
ț
with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least five minutes with the
engine turned off
(Canada: 2.0 LITERS)
MEASURE. CORRECT
ONLY IF VEH. LEVEL
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.
ț
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
̈
If necessary, add engine oil.
To check the engine oil level via the
multifunction display, do the following:
One of the following messages will
subsequently appear in the indicator:
For adding engine oil see (୴ page 243).
For more information on engine oil, see the
“Technical data” section (୴ page 374) and
୴ page 375).
̈
Switch on the ignition (୴ page 35).
ț ENGINE OIL LEVEL
OK
The standard display (୴ page 123) should
appear in the multifunction display.
(
ț ADD 1.0 Qt. TO
REACH MAX. OIL LEVEL!
(Canada: 1.0 LITER)
240
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)