Controls in detail
Useful features
i
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the “train-
ing” button may also be referred to as
“learn”or “smart” button. If there is dif-
ficulty locating the transmitting button,
refer to the garage door opener opera-
tor’s manual.
Some garage door openers (or other rolling
code equipped devices) may require you to
perform this procedure a third time to
complete the training.
If the indicator lamp 1 blinks rapidly
for about two seconds and then turns
to a constant light, continue with pro-
gramming steps 8 through 12 as your
garage door opener may be equipped
with the “rolling code” feature.
Step 12:
̈
Confirm the garage door operation by
pressing the programmed integrated
signal transmitter button (2, 3
or 4).
Step 7:
Step 9:
̈
To program the remaining two buttons,
repeat the steps above starting with
step 3.
̈ Press “training” button on the garage
door opener motor head unit.
Step 13:
̈
To program the remaining two buttons,
The “training light” is activated.
repeat the steps above starting with
step 3.
You have 30 seconds to initiate the follow-
ing step.
Rolling code programming
To train a garage door opener (or other roll-
ing code devices) with the rolling code fea-
ture, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Gate operator/Canadian programming
Step 10:
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the inte-
grated signal transmitter to pick up the sig-
nal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
̈
Firmly press, hold for two seconds and
release the programmed integrated
signal transmitter button (2, 3
or 4).
Step 11:
Step 8:
̈
Press, hold for two seconds and re-
̈
Locate “training” button on the garage
door opener motor head unit.
lease same button a second time to
complete the training process.
209
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)