Practical hints
What to do if …
Vehicle status messages in the
multifunction display
High-priority messages appear in the mul-
tifunction display in red color.
Warning!
G
Certain messages of high priority cannot
be cleared from the multifunction display
using the reset button (୴ page 120) or
button j, k, ·, or è on the
steering wheel.
Warning and malfunction messages ap-
pear in the multifunction display located in
the instrument cluster.
All categories of messages contain impor-
tant information which should be taken note
of and, where a malfunction is indicated, ad-
dressed as soon as possible at an autho-
rized Mercedes-Benz Light Truck Center.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Other messages of high priority and mes-
sages of less immediate priority (regular
display colors) can be cleared from the
multifunction display using the reset but-
ton (୴ page 25) or button j, k,
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property dam-
age or personal injury.
Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.
Selecting the vehicle status message
memory menu in the control system
·
, or è on the steering wheel. They
are then stored in the vehicle status mes-
sage memory (୴ page 131). Remember
that clearing a message will only make the
message disappear. Clearing a message
will not correct the condition that caused
the message to appear.
(
uncleared messages.
୴ page 131) displays both cleared and
296
| Categories | Mercedes-Benz G-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes Benz W463, Mercedes-Benz G500, Mercedes-Benz G55 AMG |
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)