Controls in detail
Lighting
Daytime running lamp mode
Canada only:
USA only:
̈
Turn the exterior lamp switch to
position M or U.
The daytime running lamp mode is manda-
tory and therefore in a constant mode.
By default, the daytime running lamp mode
is deactivated. Activate the daytime run-
ning lamp mode using the control system,
see “Setting daytime running lamp mode
(USA only)” (୴ page 160).
When the engine is running, the low
beam headlamps are automatically
switched on.
When the engine is running, and you shift
from a driving position to position N or P,
the low beam headlamps will switch off
with a three-minute delay.
When the engine is running, and you turn
the exterior lamp switch to position C
or B, the manual headlamp mode has
priority over the daytime running lamp
mode.
In low ambient light conditions the
parking lamps will also switch on:
When the engine is running, and you
ț
ț
ț
Tail and parking lamps
License plate lamps
Side marker lamps
ț
turn the exterior lamp switch to
position C, the parking lamps
switch on additionally.
The corresponding exterior lamps switch
on (୴ page 49).
ț
turn the exterior lamp switch to
position B, the manual headlamp
mode has priority over the daytime run-
ning lamp mode.
For nighttime driving you should turn the
exterior lamp switch to position B to
permit activation of the high beam head-
lamps.
The corresponding exterior lamps
i
switch on (୴ page 49).
With the daytime running lamp mode
activated and the exterior lamp switch
in position M, the high beam head-
lamps cannot be switched on.
The high beam flasher is available at all
times.
132
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS500, Mercedes-Benz CLS55 AMG, Mercedes-Benz W219 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)