Operation
Engine compartment
Checking engine oil level with the con-
trol system
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.
When checking the oil level
ț
the vehicle must be parked on level
ground
ț
with the engine at operating tempera-
ture, the vehicle must have been
stationary for at least five minutes with
the engine turned off
One of the following messages will
subsequently appear in the indicator:
̈ If necessary, add engine oil.
For adding engine oil, see (୴ page 282).
ț Engine oil level ok
For more information on engine oil, see the
“Technical data” section (୴ page 429) and
(୴ page 432).
ț Add 1.0 Qt.
to reach max. oil level
ț
with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
(Canada: 1.0 Liter)
Other display messages
ț Add 1.5 Qts.
to reach max. oil level to reach
max. oil level
If the SmartKey or KEYLESS-GO start/stop
button* is not in position 2, the following
message will appear:
To check the engine oil level via the multi-
function display, do the following:
̈
Switch on the ignition (୴ page 34).
(Canada: 1.5 Liters)
Switch on ignition
to check engine oil level
The standard display (୴ page 143) should
appear in the multifunction display.
ț Add 2.0 Qts.
to reach max. oil level to reach
max. oil level
̈
Switch on the ignition (୴ page 34).
̈
Press button k or j, on the
steering wheel until the following
message is seen in the multifunction
display:
If you see the message:
(Canada: 2.0 Liters)
Observe waiting period
281
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS500, Mercedes-Benz CLS55 AMG, Mercedes-Benz W219 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)