Practical hints
What to do if …
Lamps in instrument cluster
General information:
If any of the following lamps in the instru-
ment cluster fails to come on during the
bulb self-check when switching on the igni-
tion, have the respective bulb checked and
replaced if necessary.
Problem
Possible cause
Suggested solution
-
The yellow ABS indicator lamp
The ABS has detected a malfunction and has ̈ Continue driving with added caution.
comes on while driving.
switched off. The BAS and the ESP are also
switched off (see messages in display).
Wheels may lock during hard braking,
reducing steering capability.
The SBC brake system is still functioning nor- ̈ Read and observe messages in the
mally but without the ABS available. display (୴ page 345).
If the ABS control unit is malfunctioning, oth- ̈ Have the system checked at an autho-
er systems such as the Parktronic system*,
Distronic*, or the automatic transmission
may also be malfunctioning.
rized Mercedes-Benz Center as soon
as possible.
Failure to follow these instructions in-
creases the risk of an accident.
The charging voltage has fallen below
̈ Switch off electrical consumers that
are currently not needed, e.g. seat
heating.
10
volts. The ABS has switched off.
The battery may not be sufficiently charged.
̈
If necessary, have the generator and
battery checked.
When the voltage is above this value
again, the ABS is operational again.
336
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS500, Mercedes-Benz CLS55 AMG, Mercedes-Benz W219 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)