Controls in detail
Power windows
Fully opening the windows
(Express-open)
Synchronizing power windows
!
If the upward movement of the window
is blocked during the closing proce-
dure, the window will stop and open
slightly.
The power windows must be synchronized
̈
Press switch 2 to 5 past the resis-
tance point and release.
ț
after the battery has been disconnect-
ed
The corresponding window opens com-
pletely.
Remove the obstruction, pull the re-
spective power window switch again
past the resistance point and release.
ț
if the power windows cannot be fully
opened (Express-open) or closed
(Express-close)
Fully closing the windows
(Express-close)
If the window still does not close when
there is no obstruction, pull and hold
the respective power window switch.
The side window will then close without
the obstruction sensor function.
Synchronizing
̈
Pull switch 2 to 5 past the resis-
tance point and release.
̈ Close all doors.
The corresponding window closes com-
pletely.
̈ Switch on the ignition (୴ page 34).
̈
Pull switch 2 to 5 until the side win-
dows are completely closed.
Stopping windows during Express-op-
eration
Warning!
G
̈
Hold on to switches 2 to 5
approximately one second.
for
̈
Press or pull the respective power win-
dow switch again.
Driver’s door only:
The power windows are synchronized.
If within five seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not operate.
205
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS500, Mercedes-Benz CLS55 AMG, Mercedes-Benz W219 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)