Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Low beam bulb (halogen headlamps
only)
̈
̈
̈
̈
Turn housing cover 1 counterclock-
wise and remove it.
Turn bulb holder 6 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 6.
Insert the new bulb so that its socket
locates in the recess of bulb holder 6
and is level to it.
3
4
5
Bulb socket for turn signal lamp bulb
Bulb holder of high beam bulb
Bulb socket for parking and standing
lamp bulb
1
2
Housing cover for low beam halogen or
Bi-Xenon* headlamp
Housing cover for high beam head-
lamp/high beam flasher bulb and for
parking and standing lamp bulb
̈ Reinsert bulb holder 6 with the bulb in
6
Bulb holder of low beam bulb
the lamp and turn clockwise.
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Align housing cover 1 and turn it
clockwise.
Warning!
G
̈ Turn the exterior lamp switch to
position M (୴ page 130).
Do not remove the cover 1 for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon* lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.
̈
Open the hood (୴ page 279) (except
for side marker lamps).
390
| Categories | Mercedes-Benz CLS-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz CLS500, Mercedes-Benz CLS55 AMG, Mercedes-Benz W219 |
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)