Maintenance and Specifications
4.
Check the fluid level on the
dipstick. It should be between the
arrows in the FULL HOT range. Do
not add fluid if the level is within
this range.
5.
If the fluid is low, add fluid in small amounts, continuously checking
the level until it reaches the FULL HOT range. Be sure to put the
dipstick back in the reservoir.
BRAKE FLUID
The fluid level will drop slowly as
the brakes wear, and will rise when
the brake components are replaced.
Fluid levels below the “MAX” line
that do not trigger the brake system
warning lamp are within the normal
operating range, there is no need to
add fluid. If the fluid levels are outside of the normal operating range,
the performance of your brake system could be compromised, seek
service from your authorized dealer immediately.
TRANSMISSION FLUID
Checking automatic transmission fluid
Refer to your schedu led main ten ance in formation for scheduled
intervals for fluid checks and changes. Your transaxle does not consume
fluid. However, the fluid level should be checked if the transaxle is not
working properly, i.e., if the transaxle slips or shifts slowly or if you
notice some sign of fluid leakage.
Automa tic transmission flu id expa nds whe n warme d. To obt ain an
accu rate flu id che ck, dr ive the vehicle until it is warme d up
(
appr ox ima tely 20 mile s [30 km]) . If you r vehicle ha s be en
ope rated for an extende d pe riod at high spe eds, in cit y traffic
du ring hot weathe r or pu llin g a traile r, the vehicle shou ld be
turned off for abou t 30 min utes to allow flu id to cool be for e
che cking.
216
2007
Taurus (tau)
Owners Guide (post-2002-fmt)
USA (fus)
Product Specification
Categories | Ford Manuals, Ford Taurus Manuals |
---|---|
Model Year | 2007 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |